Magnetic Loop Inductance DIP Inductor High Current Inductors Filter Coil

1.Characteristics

Magnetic Loop Inductor is an electronic component component, the main function is the role of an electromagnetic induction conversion, a simpler inductance can be a wire, it can be used as an antenna. Converting electrical energy into electromagnetic waves, the more complicated thing is the hollow line diagram, which can be used in frequency selection loops and RF transmission circuits. There are also Magnetic Loop Inductor that can be used for anti-interference effects, etc.
In the high frequency band of the Magnetic Loop Inductor, the impedance is mainly composed of the resistance component. As the frequency increases, the magnetic permeability of the magnetic core decreases, resulting in the reduction of the inductance of the inductance and the reduction of the inductive reactance component. The loss increases and the resistance component increases, resulting in an increase in the total impedance. When the high-frequency signal passes through the ferrite, the inductive electromagnetic interference is absorbed and converted into heat energy. In the low frequency band, the impedance is mainly composed of the inductive reactance of the inductor. At low frequencies, R is very small, and the magnetic permeability of the magnetic core is high, so the inductance is large, and the inductance L plays a major role. The electromagnetic interference is reflected and suppressed, and this When the core loss is small, the whole device is an inductor with low loss and high quality factor Q characteristics, which is easy to cause resonance, so the phenomenon of increased interference after using ferrite beads may occur at low frequency.

​​​

2.Company Profile