Low Frequency Audio Frequency Transformer Assurance Audio 600:10k Transformer

ED8 Permalloys Audio Low Frequency Transformer Assurance Audio10k:10k Transformer

Audio transformer is used as a component of circuits such as voltage amplification and power output in radio communication, radio and television, and automatic control. The frequency response of the audio transformer is uniform in the working frequency band. The core is made of high magnetic permeability materials. The primary and secondary windings are closely coupled, so that the magnetic flux passing through the primary winding is almost all linked with the secondary winding, and the coupling coefficient is close to 1. The lowest frequency of the passband is determined by the primary winding inductance, and the highest frequency is determined by the transformer leakage inductance. To ensure that the transformer has enough passband, the primary winding inductance should be large and the leakage inductance should be small. The hysteresis loss of the iron core and the saturation of the magnetic circuit can cause signal distortion. Properly configuring the load and increasing the load current can reduce the influence of hysteresis loss; increasing the core section and leaving an air gap can prevent the magnetic circuit from being saturated, which can reduce the distortion of the signal.

Audio transformers can be divided into 3 categories according to their position in the electronic circuit.
Connected between the output circuit and the load is called the output transformer;
Connected between the signal source and the amplifier input is called the input transformer;
Connected between the output circuit of the previous stage and the input circuit of the next stage is called an interstage transformer.

product description: